FUTABA T4PM Instruction Manual page 99

Gyro mixing adjustment
(Preparation)
- Refer to the gyro instruction manual and connect the gyro
to the receiver. When using remote gain, connect gyro sensi-
tivity adjustment to the 3rd CH of the receiver.
- When using gyro mixing by switching between the NORM
(normal) and AVCS modes, use the function select switch
function (page 92) to set the switch to be used.
1
(Gyro mixing setting)
Select the setting item "MODE" by moving the (JOG) button
up or down. Set the function by pressing the (+) or (-) button.
"INH"
" "
" "
" "
" "
function is not set to "
".
"
"NORM" mode
2
(NORMAL side gain adjustment)
Select the setting item "NORM" by moving the (JOG) button
up or down. Adjust the NORMAL side gain with the (+) or (-)
button.
(AVCS side gain adjustment)
Select the setting item "AVCS" by moving the (JOG) but-
ton up or down. Adjust the AVCS side gain with the (+) or (-)
button.
3
When finished with the setting, return to the MENU screen
by pressing the (END) button.
→ "
"INH".
"AVCS" mode
Gyro mixing "GYRO MIX"
Setup items
MODE:
NORM:
AVCS:
Function SW
GYRO
Function selection (MODE)
INH, NORM, AVCS, SEL
Select button
- Select with the (+) or (-) but-
tons.
Shows the gyro mode select
switch mode.
< NO SW >
Displayed when the Gyro
Mode SW is not used.
"SELE" mode
The function select switch
screen (page 92) can be
displayed from this screen.
NORMAL / AVCS gain
(NORM / AVCS)
0 ~ 120
Initial value:30
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Gyro mode
Normal mode gain
AVCS mode gain
99