Power & Display Switch; Display When Power Switch Is Turned On - FUTABA T10PX Short Manual

Power & Display Switch
The power switch and display switch are push switches.
When the power switch (PWR) is held down, operation starts
by transmitting radio waves. When the display switch (DSP)
is held down, the transmitter side data can be checked and set.
When the power is turned off, if the power switch or display
switch is held down, the power is turned off. If both switches
are pressed simultaneously, the power is turned off quickly.
DSP
"Display mode" is dis-
played
Radio waves are not
being transmitted.
It cannot operate.

Display When Power Switch Is Turned On

The current system is displayed.
When turned on by DSP switch,
"Display" is displayed
Model #, Model name (15 characters)
User name (15 characters)
Servo operation of each channel can be
checked.
Upper: Steering trim display
Lower: Throttle trim display
Menu button
User menu button
*The figure above is partly processed for explanation, so it is different from the actual screen display.
OFF
When the power is turned off,
if the power switch or display
switch is held down, the power
is turned off. If both switches
are pressed simultaneously, the
power is turned off quickly.
When you do not run, turn OFF
Total timer or clock display (H:M)
10
Power & Display Switch
Radio waves are be-
ing transmitted.
It can operate.
Transmitter Battery voltage display
Telemetry function
Receiver -> Transmitter
The reception strength is shown.
Racing timer
Trim/dial lock display mark
microSD card mark
DT1
DT2
DT3
Function names and rate assigned
DT4
to dials are displayed.
DT5
DT6
DL1
PWR