Dual Rate/Second Dual Rate - FUTABA 3PJ Super Instruction Manual

Dual Rate
This function adjusts the + side when the servo travel is insufficient due to under-
steering and the - side when the servo travel is excessive due to oversteering on cor-
ners while running. This setting is linked to transmitter grip dial GD1. When GD1 is
assigned to another function, set dual rate with this screen.
Second Dual Rate
Use this function when facing a fence due to a crash, etc.
1. (Dual rate function setting)
Call the Set-Up mode screen
by pressing the UP and
DOWN keys simultaneously
at the initial screen.
2. Call the D/R function screen
by pressing the UP or DOWN
keys in function map order.
3. Adjust the D/R amount
(travel) with the + or - key.
4. (Second dual rate function
setting)
Cal the set-up screen by
pressing the SELECT key.
5. Adjust the D/R amount
(travel) with the + or - key.
76

Dual Rate/Second Dual Rate

Operation
- Simultaneously adjusts the travel of both the left and right
steering servos.
- Second dual rate switches to the servo travel only when the
set switch was activated.
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- Return to the initial value (100%)
DIRECT ST.EXP M.SEL
+ by pressing the + and - keys si-
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
multaneously for about one sec-
ond.
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- Return to the initial value (100%)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
- by pressing the + and - keys si-
SELECT DOWN
TH.EXP ATV CUSTOM
multaneously for about one sec-
ond.
Setting range: 0~100%
Setting range: 0~100%