IBM 01 Maintenance Manual page 231

MODEL Cl
CUSTOMER ENGINEERING
operate as before. They have been ,altered to con-
form to the new cover design.
The carriage-release levers are operated through
buttons contained in the carriage-end covers.
RAILS
Rails. trucks. starwheels. and rollers remain the
same as on the Model B. The carriage final-stop has
been eliminated. Due to the new carriage lengths a·
new truck insertion method is used (Figure 16).
THIRTEEN INCH CARRIAGE
!..--
Pos1tion No. 1
SEVENTEEN INCH CARRIAGE
TWENTY INCH CARRIAGE
Figure
16.
Ca"iage Truck Insertion
Removal
CARRIAGE AND RAILS. The carriage and rails
may be removed together as an assembly as follows:
1. Disconnect the left-hand tab-lever spring and the
two decelerator-arm springs.
20