IBM 01 Maintenance Manual page 230

REFERENCE MANUAL
MODEl
Cl
Figu,.,
14.
Margin Rack Cente,. Support
Platen latches have been altered to make them self-
locking. The new latch consists of two levers, pivoting
on eccentrics, connected by a flat platen-latch link.
Pulling the latch toward the front pivots the latch
lever over the platen shaft. The latch engages a notch
in the latch lever, locking the two together( Figure
15).
Platen
Latch
Lever
Figure 15.
Platen Latches
The multi-copy lever, fe~d-roll-release lever, vari-
able-line-space lever, and the detent-release lever
19