Line Lock - IBM 01 Maintenance Manual

REFERENCE MANUAL
Actuating Lever
---..
Pivot Stud
Tab Lever
Figure
12.
Margin Release
Removal
MODEL Cl
Refer to Model B1, Margin Release. It is not neces-
sary to remove the typewriter from the base section.
Adjustment
MARGIN RELEASE ECCENTRIC. Adjust so that
the margin control lever clears the underside of the
margin rack by .010" to .015" (Figure 12).
LINE LOCK
The line lock is essentially the same as on the
previous model (Figure 13). It has been altered to
conform to the new rear rail parts and to lock all
letter keylevers when at the right margin. All func-
tional and letter keylevers except the shift are locked.
when the switch is in the OFF position.
17