IBM 01 Maintenance Manual page 197

MODEL 81
CUSTOMER ENGINEERING
RIBBON LIFT MECHANISM
1. Remove the ribbon lift link.
2. Disconnect the ribbon lift guide clevis.
3. Disconnect the color control link where it is attached
to the lever on the color control shaft.
4. Remove the two screws mounting the mechanism to
the power frame. The mechanism may then be slipped
to the right and out of the machine.
RIBBON LIFT GUIDE.
Remove the ribbon lift guide by
disconnecting its clevis from the lift lever. The lift guide
may then be removed from the top of the typewriter.
:Ribbon Reverse
Lug 10 end
of shaft
FiAure 58. Ribbon Feed Mechanism
58