Configuring the local network
Synchronising the TCP/IP settings with the Gigaset Router
You have now configured your computer so that it is ready to be connected to the
Gigaset Router. You now have to release the old TCP/IP settings and update them with
the settings of your Gigaset Router.
Click on Start – Programs – Accessoires – command prompt in Windows Desktop.
N
In the command prompt window enter the
N
ipconfig /release command and press the ENTER KEY.
Then enter the ipconfig /renew command and press the ENTER KEY.
N
If the router's default IP address (192.168.2.1) was not changed, the IP address
should now read 192.168.2.x (with x being a number between 2 and 254. The
Subnet mask must always be 255.255.255.0 and the Default Gateway must have
the router's IP address (192.168. 2.1). These values confirm that your Gigaset Router
is working.
Enter exit and press the ENTER KEY.
N
42