Gigaset SE105 Owner's Manual page 49

Gigaset Router User Interface
Working area
Use the working area for configuration.
With configurable parameters you will see a dialogue box or selection list with default
settings. There may be some limitations on the possible entries, e. g. entering special
characters or certain value ranges. If your entry does not meet the rules for the box in
question, you will see an error message. You can then repeat the input.
Once you have made any configuration changes on a page, you can activate the new
setting by clicking on APPLY or NEXT at the bottom of the page.
Please read the following information if you are using
Internet Explorer 5.0.
Once you have entered the command, the page will be properly updated
i
if you have configured Internet Explorer as follows:
In Extras – Internet options – General – Temporary Internet files –
Settings the setting for Check for newer versions of the saved pages
should be set to For every visit to the page.
Buttons
Basic Setup NEXT
BACK
CANCEL
FINISH
HELP
Advanced APPLY
Setup:
CANCEL
HELP
Other buttons may be visible depending on the function in question. These are
described in the relevant sections.
48
Opens the page for the next configuration step.
Returns to the previous configuration step.
Deletes all the entries on page since the last time it was
opened.
Transfers the settings you have made to the router
configuration.
Displays help information about the current page.
Transfers the settings you have made to the router
configuration.
Deletes all the entries on page since the last time APPLY
was run.
Displays help information about the current page.