Activation - Gigaset SE105 Owner's Manual

First Steps

Activation

Plug the power unit cable into the 9V 1A socket on the router. Plug the other end of the
power unit cable into a power outlet.
This will activate the router. Check whether the LED display for the mains (PWR) on the
front panel is lit up. If this is not the case, please turn to "Fault tracing" on page 92.
The wireless link to the PCs connected via a wireless network adapter will be established
automatically if their network adapters have been configured with the same SSID as the
router (see page 14). It can take a few seconds for the wireless connection to be
established.
16