Gigaset SE105 Owner's Manual page 105

Siemens router owner's manual
Table of Contents

Advertisement

Glossary
Subnet mask
one, two or three parts form the network number, the remainder the
computer number. You can find out the IP address of your PC using the ipconfig
command.
IP addresses can be assigned manually (see
Static IP
address) or automatically (see
Dynamic IP
address).
On the Internet
Domain names
are normally used instead of the IP addresses.
DNS
is
used to assign Domain names to IP addresses.
The Gigaset Router has a
Private IP address
and a
Public IP
address.
IP address pool
The Gigaset Router's IP address pool defines a range of
IP addresses
that the router's
DHCP Server
can use to assign
Dynamic IP
addresses.
IPSec
Internet Protocol Security
The term IPSec covers a number of
Protocols
used for encrypted transmission of data
packets over the Internet. IPSec uses digital certificates for device authentication. IPSec
is offered by Internet Service Providers for implementing Virtual Private Networks (VPN).
See also: PPTP,
L2TP
ISP
Internet Service Provider see
Internet Service Provider
L2TP
Layer Two Tunneling Protocol
L2TP is an extension of
PPTP
and is offered by
Internet Service Providers
for
implementing Virtual Private Networks (VPN). It covers most of the features of PPTP but
with less overhead and is better for managed networks.
LAN
A local network links network components so that they can exchange data and share
resources. The physical range is restricted to a particular area (a site). As a rule the users
and operators are identical. A local network can be connected to other local networks
or a wide-area network (WAN) such as the Internet.
With the Gigaset SE105 dsl/cable you can set up both a wired local
Ethernet
network and
a wireless
IEEE
802.11b-standard network.
Lease time
Lease Time defines the period of time in which the PCs retain the
Dynamic IP address
assigned to them by the
DHCP
server without changing them.
Local IP address
See
Private IP address
MAC address
Media Access Control
The MAC address is used for the globally unique identification of a
Network
adapter. It
comprises six parts (hexadecimal numbers), e. g. 00-90-96-34-00-1A. The MAC address
is assigned by the network adapter manufacturer and cannot be changed.
Mbps
Million of bits per second
104

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents