Gigaset SE105 Owner's Manual page 56

Select the connection type:
N
– PPPoE for DSL
Enter the PPPoE
Provider.
The Service Name is optional but may be required by some Internet Service
Providers.
N
!
N
– Fixed IP address Special case for DSL access
Some Internet Service Providers assign the router a
case with your router, enter the assigned parameters in the dialog boxes,
IP address is the address of the Gigaset Router and Router's IP address the
router address of the Internet Service Provider.
DNS IP address is the address of the Internet Service Provider's
Click on FINISH to complete the setup.
N
Your WAN connection has now been configured.
Once you have completed configuration, the router will try to open an Internet
connection. The router's Status page will appear with information about the
connection.
user name and password assigned by your Internet Service
Maximum idle time (Default setting: 0 minutes)
This is the period of time after which the Internet connection is
closed down automatically if no data is transmitted. Entering
"0" deactivates the function. This means that the connection
will remain open even if no data is transmitted. This can lead to
high charges if you are using a time-based pricing system! In
this case, you should enter a value other than "0".
Auto-reconnect (Default setting: deactivated)
Auto-reconnect means that applications such as Web browser,
Messenger and Email can automatically open an Internet
connection when they are launched. If you do not have
rate, this can lead to high charges being incurred. Therefore the
default setting is deactivated. Please refer to page 86 for
manually opening a connection.
General configuration with Basic Setup
Static IP
Flat
address. If this is the
DNS Server.
55