Gigaset SE105 Owner's Manual page 53

General configuration with Basic Setup
Enter the required data.
N
N
!
N
Once you have entered the data, click on FINISH to complete setup.
N
Once you have completed configuration, the router will try to open an Internet
connection. The router's Status page will appear with information about the
connection.
You can change your settings later on with Advanced Setup. To do this
N
!
open WAN – PPPoE.
52
Maximum idle time (Default setting: 0 minutes)
This is the period of time after which the Internet connection is
closed down automatically if no data is transmitted. Entering "0"
deactivates the function. This means that the connection will
remain open even if no data is transmitted. This can lead to high
charges if you are using a time-based pricing system! In this case,
you should enter a value other than "0".
Auto-reconnect (Default setting: deactivated)
Auto-reconnect means that applications such as Web browser,
Messenger and Email can automatically open an Internet
connection when they are launched. If you do not have
this can lead to high charges being incurred. Therefore the default
setting is deactivated. Please refer to page 86 for manually
opening a connection.
Flat rate,