Defining Address Mapping - Gigaset SE105 Owner's Manual

Configuration with Advanced Setup

Defining Address mapping

In the default setting, all the local PC IP address are mapped to your router's public IP
address. If you have a large number of users on your local network, it may be advisable
to order several IP addresses from your Internet Service Provider. Then use address
mapping to define which local IP addresses will connect to the Internet via which public
IP address.
Remember that connections via several IP addresses through the WAN
i
port can lead to bottlenecks because all the connections have one
hardware interface.
In the NAT menu, select Address mapping.
N
Enter the public IP addresses you want to share in the Global IP boxes.
N
Enter in the line underneath the range of local IP addresses that are to share this
N
public IP address.
To apply the settings click on APPLY.
N
74