Remote Management
Remote management enables a PC that is not on your local network to be used to
configure the Gigaset Router with a standard Web browser.
In the System menu, select Remote Management.
N
In Host address enter the IP address of the PC that is to have access to the router's
N
user interface from outside your local network.
Remember that the Internet Service Provider may assign a
N
dynamic IP address to the PC and so that it will change. Make sure
i
that the PC always has the same IP address.
If you use the IP address 0.0.0.0, any PC can be used to manage
N
the Gigaset Router.
Check the Enabled box.
N
To apply the settings click on APPLY.
N
Configuration with Advanced Setup
63