Network Configuration For Windows 98, 98 Se, Me; Setting Up A Pc As Client For Microsoft Networks - Gigaset SE105 Owner's Manual

Configuring the local network

Network configuration for Windows 98, 98 SE, ME

To integrate a PC with Windows 98, 98 SE or ME in a local network via a Gigaset Router:
1. Set up the PC as Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 19).
3. Install the TCP/IP protocol (see page 20).
4. Make TCP/IP protocol settings (see page 21).
5. Deactivate the http proxy (see page 25).
6. Synchronise the TCP/IP settings with the Gigaset Router (see page 26).

Setting up a PC as Client for Microsoft Networks

Before the PCs on your network can work together, you have to configure them as
Microsoft Network Clients. This can be done as follows:
Click on Start – Settings – Control Panel.
N
Double click on the Network icon and then open the Network tab in the
N
Configuration window.
Check whether the list of components contains the entry Client for Microsoft
N
Networks.
If it is not there click on Add.
N
Select as network component type Client and click on Add.
N
18