First Steps
Operating displays and connections
Front panel
LED displays
The front panel of the Gigaset Router contains LED displays that show the operating
state and simplify installation and fault finding in the network.
The LEDs show the following:
LED
State
PWR
On
WLAN
On
WAN
On
Flashing The WAN connection is sending or receiving data (traffic).
Link/ACT
On
Flashing The LAN connection is sending or receiving data (traffic).
Speed
On
Off
10
Status
The Gigaset Router has been switched on.
The Gigaset Router is ready to open wireless connections.
The WAN connection has established a valid network
connection.
The LAN connection has established a valid network
connection.
The LAN connection is running at 100 Mbps.
The LAN connection is running at 10 Mbps.