To verify whether the TCP/IP protocol is properly installed, proceed as
follows:
1. On the Windows task bar, click the
2. Point to
3. In the Control Panel window, double-click the
4. Verify that the list of network components includes the
for the wireless network interface that you will use to access
the Access Point RLM (e.g. your Ethernet or adapter).
•
If
with
"Configuration Scenarios" (page
•
If
, proceed as follows:
a.
Click the
b.
From the list of component types, select
the
c.
Select the TCP/IP protocol from the list displayed.
d.
When your network does not use IP addressing, enable the
option
This will disable the DHCP mechanism that would assign an IP
address to your LAN administrator station automatically in
networks that include a DHCP server.
e.
Enter a user-defined value in the
range of 1-253.
When configuring multiple LAN administrator stations, make
sure to assign different values to each station.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
and then click on
, close all windows using the
button.
button.
, where xxx may be any numerical value in the
button.
.
icon.
button and proceed
47).
.
field of the format
and click
45