Table of Contents
Advertisement
You are advised to consult the MOBIC web site at regular intervals
to find out whether newer software is available for your Access
Points RLMs.
The RLM Manager remote link test enables you to investigate the radio link
between the Access Point RLM of your choice (the "initiator station") and a
station connected to the selected RLM.
This station can be a wireless station connected to the selected RLM.
i
The remote link test works only in combination with SIMATIC NET
Radio Link Modules RLM.
The user-interface of the RLM Manager Remote Link Test is very similar to
the Link Test of the CP 1515 Manager.
To display the remote statistics for the Radio Link Module, you must first
connect to the target RLM as described in
RLMs (page
99).
1. Select the
window pictured in
The fields in the top section of this window identify the "initiator station"
you selected when connecting to the Access Point RLM.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
tab and click the
Figure 19 Select a Link Test
Connecting to Access Points
button to display the
Partner.
103
Advertisement
Table of Contents
