Table of Contents
Advertisement
As is the case in any roaming environment, you must configure all Access
Points RLMs in multiple channel configurations with an identical network
name.
The preferred channel separation between the channels in neighboring cells
is 25 MHz (5 channels). Subject to the number of channels supported by the
PC cards CP 1515 available in your country, this means that you can apply up
to three different channels within your wireless network (see
2 Recommended Sub-Channel Configurations
configurations).
Applying two channels that allow the maximum channel separation will
decrease the amount of channel cross-talk, and provide a noticeable
performance increase over networks with minimal channel separation.
To configure networks with multiple channels, refer to
Management (page
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
138)" .
Table
for recommended channel
"Frequency Channel
31
Advertisement
Table of Contents
