Table of Contents
Advertisement
A forced reload procedure consists of three steps:
1.
Step 1 -
2.
Step 2 - Set to "Forced Reload"
3.
Step 3 - Configuring and Uploading
One additional step is optional, but recommended:
4.
Creating a Back-up File
A forced reload procedure can only be done when you have physical access
to the RLM.
•
Familiarize yourself with the location of the RLM:
Do you need special equipment to access the Access Point RLM, such
as a ladder or keys to get into the room where the Radio Link Module is
located?
•
Do you have a back-up copy of the RLMs current configuration file
(*.cnf)?
— If
configuration.
— If
, you will need to set all the user-defined parameters for the
RLM that apply in your network again.
Back-up copies may have been created upon initial installation using the
246
Preparations.
, you can use the back-up copy to restore the original
option of the RLM Manager program.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
Mode.
Files.
C79000-G8976-C171-01
Advertisement
Table of Contents
