Table of Contents
Advertisement
5. Follow the instructions on your screen. If not available yet, a special
Siemens group in the Windows Programs menu will be created. This
group will provide access to the CP 1515 Manager.
i
Previously installed versions of the CP 1515 Manager program will
automatically be replaced.
During the installation, you will be prompted for a directory to install the
program files. The default directory for the CP 1515 Manager program is:
C:\Programs\Siemens I-Gate\Clientmanager
Throughout this manual, we make references to a variety of files. Unless
otherwise specified, you will find these files in this default directory.
The RLM Manager can be installed on both wireless and wired stations. To
install the program, you will need to select a station that is configured with:
•
Network Interface Card (NIC) to connect this station to the network. The
NIC cards can be of any type, including:
1.
PC card CP 1515 (for wireless stations)
2.
Ethernet card
•
TCP/IP protocol stack (see
43)).
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
"Verifying the TCP/IP Protocol Settings" (page
41
Advertisement
Table of Contents
