Siemens CP 1515 User Manual page 142

3. Choose the socket (A or B) for the network interface that you would like
to configure.
4. Click the
sub-channels, a pull-down box will appear, allowing you to select a
different operating frequency. The number of channels is subject to local
regulations.
5. In the Wireless Advanced Setup window, use the
menu to select a sub-channel that allows for maximum channel
separation from neighboring Access Points RLMs (minimum channel
separation: 25 MHz).
Table 2 lists a number of successful channel combinations that you can
use to configure SIMATIC NET IWL networks with multiple Radio Link
Modules.
• For Dual Channel Configuration (page
channels A and B.
• For Multiple-Channel Configuration (page
channels A, B and C
i
The availability of the listed channels in
Channel Configurations
apply in your country. A complete list of supported channels for your
country can be found in the manual "Industrial Ethernet Wireless
LAN CP Basics" and via the MOBIC web site
142
button. The PC Card CP 1515 supports multiple
is subject to local radio regulations that
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
138), alternate between
140), alternate between
Table 2 Recommended Sub-
.
C79000-G8976-C171-01
pull-down