Table of Contents
Advertisement
•
Run RLM Manager and connect to the target Radio Link Module.
•
Upload the template file that contains the values that are common for all
RLMs from a template file.
•
Set the unique parameters for each Access Point RLM.
•
Save the values to an individual configuration file on disk.
The detailed procedure is as follows:
1. Start the RLM Manager program.
2. Select the target Radio Link Module from the list or enter a specific
Access Point RLM IP address. If the target Access Point RLM is not
displayed in the list, choose
RLM menu.
If the selected Access Point RLM is still using the factory-set IP address,
for example when you are configuring a new "out-of-the-box" Radio Link
Module, you will be prompted to change the default IP address as
described earlier in
60).
3. When asked navigate to the disk and/or folder where you stored the
template file.
4. Select the template configuration file (e.g. common.cnf") and click the
button.
!
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Step 2 - Connecting to the Access Point RLM (page
Radio Link Module
from the
223
Advertisement
Table of Contents
