Table of Contents
Advertisement
•
When you have assigned a unique IP address value to each Access Point
RLM, you should be able to access each Access Point RLM from
anywhere within the network by using its unique IP address.
When installing new Access Points RLMs "out-of-the-box" , you are advised
to configure the Radio Link Modules one-by-one using the "desktop
workplace" scenario as pictured in
Connection. This will allow you to assign a unique IP address value to each
unit prior to connecting the units to the network infrastructure.
A wireless, mobile LAN administrator station allows you to use the RLM
Manager in combination with the CP 1515 Manager tool.
50
Figure 5 Wired Access via a Direct Cable
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Advertisement
Table of Contents
