Table of Contents
Advertisement
You can modify the Access Point RLM configuration parameters using the
button from the main RLM Manager window.
Keep in mind that you will need to address the Radio Link Module using its
new IP address and the new read/write password (if you changed the Read/
Write Password parameter) to open the configuration file. If your SIMATIC
NET IWL management station is a wireless station, you may need to modify
the station's interface parameters to match the values that were originally
stored in the Access Point RLM.
Alternatively, if you have forgotten the read/write password, or any other
setting required to access the RLM, you may need to do a forced reload, as
described in
Forced Reload Procedure (page
i
When you make changes to the configuration of a particular Radio
Link Module, you should update the "Access Point Configuration
Record" to reflect these changes.
226
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
244).
C79000-G8976-C171-01
Advertisement
Table of Contents
