Connecting The Electrical Connection Line; Connecting The Power Optimization System - Henny Penny FlexFusion Spacesaver Installation Manual

Connecting the unit

6.2.1 Connecting the electrical connection line

DANGER
DANGER
Prerequisite Unit dead

6.2.2 Connecting the power optimization system

DANGER
22
The unit can be included in a potential equalization system by means of
appropriately sized wiring.
Risk of personal injury and property damage from electric shock
• Before working on the unit, ensure that the unit has been disconnected from
the power supply.
Risk of personal injury and property damage from electric shock
• Before connecting, ensure that the electrical connection line is dead.
• Ensure that the electrical connection line is undamaged.
A
a
b
c
Image: Unit with electrical connection
a Connection terminals
b Threaded cable connection
Electrical connection line dead
Rear panel removed
1. Feed the electrical connection line into the unit through the
threaded cable connection.
2. Connect the electrical connection line in accordance with the
wiring diagram.
3. Secure the electrical connection line with cable ties.
4. Tighten the threaded cable connection securely to provide strain
relief.
5. Close the housing (see "Opening and closing the housing").
6. Fill out the start-up operation report.
Risk of personal injury and property damage from electric shock
• Before working on the unit, ensure that the unit has been disconnected from
the power supply.
Installation instructions
B
a
b
c
c Electrical connection line