5 Installing The Unit; Minimum Clearances - Henny Penny FlexFusion Spacesaver Installation Manual

5 Installing the unit
CAUTION
CAUTION
NOTICE

5.1 Minimum clearances

Risk of crushing from improper installation
• Protect the unit and work area during installation and alignment.
Risk of fire from failure to observe applicable regional fire preven-
tion regulations
• Observe applicable regional fire prevention regulations.
Risk of property damage from overheating of the unit
• Do not install the unit close to heat sources.
B
C
D
Image: Minimum clearances to walls, ceiling or units
A B
--- 100 (3,94)
All dimensions in mm (in)
* Depends on the kitchen ventilation system and quality of ceiling material
The following clearances from walls, ceilings or other equipment must
be maintained when installing the unit:
• Clearance to deep-fat fryers, at least one length of the hand shower
at left and right.
Installation instructions
A
C *
50 (1,97)
Installing the unit
D
---
17