Specifications - Robertshaw Smart Sense Series Installation Manual

SPECIFICATIONS

Input Voltage
Relay Rating
Operating Temperature
Operating RH
Storage Temperature
Size
Display Size
Temperature Sensor(s)
Accuracy in ON position
Accuracy in OFF position
Stage Delays
Timed Upstage Delay
Anti-Cycle Delay
Maximum Hourly Cycles
Display Resolution
Control Range
Outside Air Temp Display Range
Backlight
Backlight Life
24V AC 50/60 Hz +/- 15%
24V AC @ 1 Amp maximum per relay
32 to 122ºF (0 to 50ºC)
0 - 95% (non condensing)
32 to 150ºF (0 to 65ºC)
4.5" x 4" x 1" (113 x 103 x 23 mm)
2.9" x 2.2" (74 x 55 mm)
NTC type 3 - 10KΩ in ON position/20KΩ in
OFF position
+/- 3 ºF degrees @ 77ºF
(+/- 0.3 ºC degrees @ 25ºC)
+/- 3 ºF degrees @ 34ºF
(+/- 0.3 ºC degrees @ 1ºC)
Minimum temperature change over time
method
5 - 90 minutes
Off to 4 minutes
Unlimited, 30, 10 or 6 (Installer set)
1 ºF degree (0.5 ºC degrees)
OFF to 100ºF (38ºC)
17 to 140ºF (-8 to +60ºC)
Blue
3,000 hours to half brightness
52