Before Applying Power; Commissioning - Robertshaw Smart Sense Series Installation Manual

If this installation will be using ModBus Communications, read the section
ModBus Communications on page 44 of this manual.
If this installation will be using Remote Sensors, read the section Using Remote
Temperature Sensors on page 39 of this manual.

before Applying Power

Read the sections Commissioning and Advanced Installer Settings. Review each
setting and understand how it will affect your installation. Plan ahead for any
changes you will make.

COMMISSIONING

As with any thermostat, commissioning ensures that the thermostat and the
equipment connected to it are operating correctly and as expected. Although the
SMART 2000 is a multi-functional thermostat, commissioning is a step-by-step
process. Follow the steps detailed below and use the Troubleshooting Guide on
page 54 if you encounter a problem.
When the thermostat is fitted to the base plate and when 24V AC power is first
applied, the LCD should briefly show all available segments (an LCD function
test), then display the software version number before displaying the time and
operating mode.
20