Table of Contents
Advertisement
Connecting the unit
6 Connecting the unit
DANGER
CAUTION
NOTICE
6.1 Opening and closing the housing
6.1.1 Removing and attaching side wall
Notice
20
Risk of personal injury and physical damage from electric shock
• Before working on the FlexFusion Team , ensure that both power circuits
within the unit are not live.
• Do not operate the unit with the housing open.
Risk of injury from sharp edges
• Wear protective gloves.
Risk of property damage from damage to the lines
• Remove and attach housing components carefully.
Removing side wall
Image: Removing the side wall
1. Unscrew the screws in the middle of the side wall.
2. Unscrew the screws at the bottom of the side wall.
3. Pull the side wall forwards at the bottom edge.
4. Remove the side wall.
Attaching side wall
Risk of property damage from leaky housing
• Check seals when attaching the housing parts.
• Replace damaged gaskets.
Installation instructions
Advertisement
Table of Contents
