G Card Shot; Card Shot - Sharp AR-M550N Operation Manual

SPECIAL MODES

Card shot

When copying a card, this function allows you to combine the front and back sides on a single sheet of paper.
Original
CARD
CARD
Front of
card
Back of
card
Example:
Portrait
8-1/2" (A4) size
1 Touch the [PAPER SELECT] key and then
select the desired paper size.
READY TO SCAN FOR COPY.
1. 8 x11 1 / 2. 8 x11 1 /
8 x11 1 /
2
2 2
PLAIN PLAIN PLAIN
3. 8 x11 1 / 5. 8 x11 1 /
HEAVY PAPER
2 2
4. 11x17 PLAIN PLAIN
NOTE
If paper of the desired size is not loaded in any tray,
load paper of the required size in a paper tray or the
bypass tray. (See "Setting the paper type and paper
size" on page 2-10.)
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
2 Touch the [CARD SHOT] key in the special
modes screen (2nd screen).
TRANSPARENCY
MULTI SHOT
INSERTS
TAB COPY CARD SHOT
5-28
Copy
CARD
Example:
Landscape
8-1/2" (A4) size
The selected paper size
key is highlighted and
the paper selection
screen closes.
The CARD SHOT
setting screen will
appear. A card shot
icon ( , etc.) will also
appear in the upper left
corner of the screen to
indicate that the
function is turned on.
G Copying is only possible on standard size paper.
G A copy ratio cannot be selected when using this
function.
G The image cannot be rotated when using this
function.
3 Enter the X dimension (width) and Y
dimension (length) of the original with the
keys.
CANCEL OK
SIZE RESET
FIT TO
PAGE
GX (width) is initially selected. Enter X and then
touch the Y ( ) key to enter Y.
GTo return the X and Y values to the initial
settings configured in the key operator
programs, touch the [SIZE RESET] key.
("CARD SHOT SETTINGS" on page 14 of the
key operator's guide).
GTo have the images enlarged or reduced by a
suitable ratio based on the entered original
size so that the front and back sides fit into the
selected paper size, touch the [FIT TO PAGE]
key.