Loading Paper In Paper Tray 5 (Optional Large Capacity Tray); Specifications (Optional Large Capacity Tray) - Sharp AR-M550N Operation Manual

Loading paper in paper tray 5 (optional large capacity tray)

The large capacity tray can hold up to 3,500 sheets of 8-1/2" x 11" size (A4) SHARP standard paper (20 lbs. (80
g/m 2 )). If you wish to change the paper size, please consult your dealer (the paper size must be changed by a service
technician).
1 Pull the tray out until it stops.
Place the paper in the center of the paper
2
table.
changed, be sure to change the appropriate
settings as explained in "Setting the paper type
and paper size" (See page 2-10).

Specifications (optional large capacity tray)

Name
Paper size
Paper weight
Paper capacity (plain)
Dimensions
Power supply
Weight
Overall dimensions when
attached to machine
Specifications are subject to change for improvement without notice.
When the tray is in
operation, do not use
excessive force to pull
the tray out. This may
damage the tray.
The paper stack must
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (20 lbs.
(80 g/m 2 ))
If the paper type was
Large capacity tray (AR-LC6)
8-1/2" x 11" (A4)
16 to 28 lbs. (60 to 105 g/m
3500 sheets (20 lbs. (80 /m
14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H)
(376 mm (W) x 546 mm (D) x 518 mm (H))
Supplied from the main unit
Approximately 62.9 lbs. (28.5 kg)
53-3/64" (W) x 26-47/64" (D)
(1347 mm (W) x 679 mm (D))
3 Push the tray firmly all the way into the
machine.
2 )
2 ))
LOADING PAPER
The paper table will
automatically rise to the
paper feed position.
2-5
2