Sharp AR-M550N Operation Manual page 65

I I I I Removing a staple jam in the finisher
1 Perform steps 1 to 2 of the procedure for
"Replacing the cartridge in the finisher"
on page 3-7.
2 Holding the knob, lower part (A).
Stapling area
(A)
NOTE
Do not touch the stapling area.
The stapler could injure you.
Remove any jammed staples.
3
FINISHER AND SADDLE STITCH FINISHER
Holding the knob, return part (A) to its
4
original position.
(A)
Return the staple case to its original
5
position.
6 Close the front cover of the finisher.
Insert the cartridge all
the way in until it clicks
into place.
3-9
3