Glass; Automatic Two-Sided Copying From The Document Glass - Sharp AR-M550N Operation Manual

Automatic two-sided copying from the document glass

The following two-sided copying function is possible. The copy paper is turned over automatically, allowing easy two-
sided copying.
Original
1 Place an original on the document glass.
(pages 4-3 to 4-6)
Document glass scale
mark
8½x14
or B4
8½x11 or A4 11x17 or A3
GAlign the corner of the original with the tip of the
arrow mark on the document glass scale.
GPlace the original in the appropriate position for its
size as shown above.
2 Touch the [2-SIDED COPY] key.
SPECIAL MODES
2-SIDED COPY
OUTPUT
Copy
Document glass scale
mark
8½x11
or A4
3 Touch the [1-sided to 2-sided copy] key.
Example of a
portrait-oriented
original
When making automatic two-sided copies of a
one-sided 11" x 17" (A3) or 8-1/2" x 14" (B4) size
portrait original, or when you wish to invert the top
and bottom of the back side of a two-sided original,
touch the [BINDING CHANGE] key.
Touch the [OK] key.
4
0
OK
BINDING
Perform steps 3 to 8 on pages 4-11 and 4-12.
NORMAL COPYING
Example of a
landscape-oriented
original
4-13
4