G About The Settings; About The Settings - Sharp AR-M550N Operation Manual

About the settings

I I I I Total count
This displays the following sheet counts (the
counts that can be displayed vary depending on
the options installed):
Number of pages output by the machine.
1
Number of original pages transmitted by the
2
machine.
Number of times the automatic document feeder
3
was used to feed original pages and number of
times the stapler was used (if installed).
Number of pages stored by document filing.
4
In the case of only,
1
G11" x 17" (A3) size paper is counted as two
sheets.
GEach sheet of paper used for automatic two-
sided copying is counted as two sheets (11" x
17" (A3) paper is counted as four sheets).
GPaper with an entered size of 15-1/8" (384 mm)
or larger is counted as two sheets (four sheets
during automatic two-sided copying).
I I I I Default settings
The following settings can be configured:
GDisplay contrast
Screen contrast adjustment is used to make the
LCD touch panel easier to view under various
lighting conditions. Touch the [LIGHTER] key to
make the screen lighter, or the [DARKER] key
to make the screen darker.
GClock
Use this to set the date and time in the
machine's built-in clock. This clock is used by
functions that require date and time information.
GKeyboard select
The layout of the keyboard that appears in letter
entry screens can be changed.
Select the arrangement of the letter keys that
you find easiest to use.
The following three
configurations are available:
G Keyboard 1 (QWERT... configuration)*
G Keyboard 2 (AZERTY...configuration)
G Keyboard 3 (ABCDEF...configuration)
* The default setting is "Keyboard 1".
(Example: Character
Keyboard 3 is selected)
alphabet keyboard
entry screen when
ABC abc
I I I I List print
This is used to print lists of machine settings and a
test page to check resident fonts.
The following lists and pages are available:
GAll custom setting list
Shows the hardware status, software status,
printer configuration settings, tray settings, and
counts.
GPrinter test page
Shows the PCL symbol set list, fonts, network
interface (NIC interface) settings, and settings
used for the NIC card.
GSending address list
One touch destination list, group list, program
list, and memory box list.
GDocument filing user / folder list
Shows the user names and folder names for
document filing.
GSender control list
Shows the senders that have been stored.
NOTE
A test page cannot be printed if "PROHIBIT TEST
PAGE PRINTING" (See the "Operation manual (for
printer)".) has been set to "prohibited" in the key
operator programs.
I I I I Paper tray settings
The paper type, paper size, enabled modes and
automatic tray switching can set for each tray. See
page 2-10 for details on setting the paper type and
paper size. Automatic switching to another paper
tray is used to automatically switch to another tray
with the same size and type of paper in the event
that the paper runs out during continuous printing.
This requires that the trays be loaded with the
same size of paper. The paper tray settings can be
enabled or disabled for each tray, and for printer
mode, copy mode, fax mode, Internet fax mode,
and document filing mode. To enable any function,
touch the check box key so that a checkmark (
appears.
CUSTOM SETTINGS
2
)
2-15