Sharp AR-M550N Operation Manual page 39

Select output functions that can be used
8
with the selected tray.
DOC.
I-FAX
FAX
PRINT COPY
FILING
NOTE
When the inserter (option) is selected, printing of
faxes and Internet faxes is not possible.
I I I I User type
Select a "User type" when the name of the paper
type does not appear in the selections or when you
wish to select the tray attributes yourself.
Touch the key in step 5 on the previous page
to display the user type selection screen and then
select a user type.
CUSTOM SETTINGS
TRAY 3 TYPE/SIZE SETTING
SELECT THE PAPER TYPE
USER TYPE 1 USER TYPE 2
USER TYPE 5 USER TYPE 6
Touch the checkboxes
under the desired items
to select them.
CANCEL
2/2
USER TYPE 3 USER TYPE 4
USER TYPE 7
1/2
Set the attributes of the paper tray only if
9
you have selected a user type.
FIXED PAPER SIDE
DISABLE DUPLEX
DOC.
DISABLE STAPLE
FILING
DISABLE PUNCH
"FIXED PAPER SIDE": Select when paper is to be
loaded print side down in the tray.
Make sure a checkmark does
not appear when paper is to be
loaded print side up.
• If the two-sided function is
prohibited in "DISABLING
OF DUPLEX" in the key
operator programs (page 11
of the Key operator's guide),
do not use this setting.
"DISABLE DUPLEX": Prohibits two-sided printing.
Enable when the back side of
the paper cannot be printed on.
"DISABLE STAPLE": Prohibits stapling. Enable when
using special papers such as
transparency film and label
sheets.
"DISABLE PUNCH" : Prohibits
when using special papers
such as transparency film and
label sheets.
NOTES
G Paper tray attributes cannot be set when a user
type is not selected.
G Tray attributes depend on the selected paper.
G "FIXED PAPER SIDE" and "DISABLE DUPLEX"
cannot be simultaneously enabled.
Configure paper settings for each tray and
10
then touch the [OK] key to exit.
NOTE
The size and type of paper loaded in the bypass tray
can also be set from the paper setting screen. Touch
the [PAPER SELECT] key in the main screen to
display the paper selection screen, and then touch
the [PAPER SELECT] key of the bypass tray and go
to step 5.
LOADING PAPER
Touch the checkboxes to
the left of the items to
select them.
punching. Enable
2-11
2