10 Settings; List Of Parameters; Shortcuts Menu; Information Menu - Baxi POWER HT+ Series Installation, User And Service Manual

10 Settings

10.1

List of parameters

Tab.37 Functions accessible with the shortcut key
Parameter
Standby/operation
316:Hot water boost
Central heating mode CH1
Room temperature CH1
Hot water heating
Hot water temp setpoint
Tab.38

Information menu

Information
Room temperature
Room temperature min
Room temperature max
Boiler temperature
Outside temp
7702630 - v02 - 11082018
10.1.1
Description
Boiler standby/Start-up.
Forcing domestic hot water pro­
duction.
Boiler operating mode.
Room temperature set point in
comfort mode.
Setting domestic hot water pro­
duction.
Domestic hot water temperature
set point.
10.1.2
Description
Is displayed if the control system unit is configured as a room
temperature appliance
Boiler flow temperature
Outdoor temperature

Shortcuts menu

Adjustment range
Standby : Boiler put on standby.
The symbol
The boiler's operating modes are deactivated.
The frost protection function is activated.
On : Putting the boiler into operation
On :
Activates the domestic hot water override.
The symbol
If a domestic hot water tank is connected to the
boiler circuit, the boiler will give priority to forcing
heating of the DHW tank, independently of the oth­
er parameters.
Off : Deactivates forcing of domestic hot water.
On :
The heating is activated in Comfort mode.
The symbols
Reduced:
The heating is activated in Eco mode.
The symbols
Timed :
The heating operates according to the defined tim­
er programs.
The symbols
Off :
The boiler is shut down and frost protection is ac­
tive.
The symbol
On : Enables domestic hot water production.
Off :
Disables domestic hot water production.
The symbol
Eco : Not used.
Information menu
is displayed.
is displayed.
, and are displayed.
1 2 3
, 1 2 3 and are displayed.
and 1 2 3 are displayed.
is displayed.
disappears from the display.
Unit
°C
°C
POWER HT +
10 Settings
77