Baxi POWER HT+ Series Installation, User And Service Manual page 106

11 Maintenance
Fig.140
5
5
Fig.141
6
Fig.142
7
7
106 POWER HT +
4. Access the internal boiler components.
5. Disconnect the power and command cables on the fan.
MW-2000783-01
6. Disconnect the ignition electrode and the flame detection sensor.
6
MW-2000784-01
7. Disconnect the 2 wires from the safety thermostat on the combustion
MW-2000785-01
chamber door and the pin under the ignition electrode.
7702630 - v02 - 11082018