Cleaning The Low-Loss Header (Optional Kit) - Baxi POWER HT+ Series Installation, User And Service Manual

11 Maintenance
Fig.178
8
8
Fig.179
Fig.180
2
120 POWER HT +
7. Close the valves.
8. Disconnect the cleaning pump.
7
MW-4000291-1
9. Open the two valves on the secondary side.
9
MW-4000292-1

11.2.10 Cleaning the low-loss header (optional kit)

POWER HT+ 1.130 and POWER HT+ 1.150
1. Lift the upper panel on the low-loss header kit.
2. Pull the upper panel on the low-loss header kit to remove it.
1
MW-4000301-1
7702630 - v02 - 11082018