Data Plate; Selecting The Position For The Outside Temperature Sensor (Optional) - Baxi POWER HT+ Series Installation, User And Service Manual

Boiler model
POWER HT+ 1.200
POWER HT+ 1.250
Fig.24
Fig.25
2
1
Z
1/2 Z
1 Optimum location
2 Possible position
7702630 - v02 - 11082018
A
1100
1100
5.3.3
The data plate is located on the back of the boiler. The data plate provides
important information regarding the appliance:
MW-3000013
5.3.4
It is important to select a position that allows the sensor to measure the
outside conditions correctly and effectively.
Place the outside sensor in a position that covers the following
characteristics:
2
1
H
1/2 H (min. 2,5 m)
Avoid placing the outside sensor in a position with the following
characteristics:
B
500
500

Data plate

Serial number
Model
Gas category
etc.
Selecting the position for the outside temperature sensor
(optional)
Recommended positions
On a façade of the area to be heated, on the north if possible.
Half way up the wall of the area to be heated.
Under the influence of changes in the weather.
Protected from direct sunlight.
Easy to access.
1/2 H (min. 2,5 m)
H
H Inhabited height controlled by the sensor
Z Inhabited area controlled by the sensor
Positions to be avoided
Masked by part of the building (balcony, roof, etc.).
Close to a disruptive heat source (sun, chimney, ventilation grid, etc.).
C D
750 500
750 500
POWER HT +
5 Before installation
E
1000
1000
1
2
MW-8800N001-3
33