Automatic Duplex Copying - Sharp MX-B350W User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

AUTOMATIC DUPLEX COPYING

The machine is capable of performing the following type of auto duplex copying. When copying, the machine will
automatically turn over the originals and paper, allowing you to make 2-sided copies with ease.
Document
glass
One-sided original
→ Two sides
Document
feeder
To change to the 2-sided copy screen, press the [DUPLEX] key on the operation panel with the base screen of copy
mode displayed.
Select "1 to 2", "2 to 2", or "2 to 1" with the [
When scanning the original on the document glass, press the [START] key after scanning the front side, turn the original
over on the glass, and press the [START] key. Duplex copying starts.
To change the orientation of the copy image on the front and back sides of the paper, set "Binding Change" to "On" with
the [ ][ ] keys.
Portrait original
1
Original → Paper
One-sided original → Two sides
Duplex original
→ Two sides
][ ] keys and press the [OK] key.
2
Orientation of the placed
original
Duplex original
→ One side
Binding Change is
used
The top and bottom of the
images on the front and
back are reversed.
2-7
Usable paper
8-1/2" x 14", 8-1/2" x 11", 5-1/2"
x 8-1/2"
(A4, B5, A5)
8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 5-1/2" x 8-1/2"
(A4, B5, A5)
Binding Change is
not used
The top and bottom of the
images on the front and
back are the same.