Scanner Sequence; The Base Screen Of Scanner Mode - Sharp MX-B350W User Manual

SCANNER►SCANNER SEQUENCE

SCANNER SEQUENCE

THE BASE SCREEN OF SCANNER MODE

The base screen of scan mode is displayed by pressing the [SCAN] key from the base screen of copy mode or fax
mode.
If a screen appears asking you what type of connection you are using after you press the [SCAN] key, select "Network" with
the [ ] or [ ] key and press the [OK] key.
Base screen of scan mode
(1) Message display
Messages appear here to indicate the current status of
the machine.
(2) Destination display
This shows the selected destination.
There are scanner transmission modes:
Scan to E-mail, Scan to Network Folder, Scan to FTP,
Scan to Desktop, and USB Memory Scan.
This shows the currently selected destination and
transmission mode.
(3) Original scanning mode / Original size display
Shows the currently selected original scanning mode and
scanning size.
: One-sided scanning in the document feeder.
: Two-sided scanning in the document feeder.
None: Document glass
(4) File format display
This shows the image data file type and file method to be
created.
(1)
(2)
(3)
(4)
(5)
(5) Resolution display
The shows the scanning resolution.
(6) Original size ►page 5-11
This is used to set the size of the original to be
transmitted.
(7) Resolution ►page 5-12
This is used to select the scanning resolution.
(8) Color Mode ►page 5-13
Set the color mode. Select full color, grayscale, and
Mono2.
(9) Format ►page 5-12
This is used to select the image data file type and file
method to be created.
5-4
(6)
(7)
(8)
(9)