Sharp MX-B350W User Manual page 25

BEFORE USING THE MACHINE►LOADING PAPER
2
A
• When loading 8-1/2" x 14" paper in tray 2, remove divider plate A.
Move divider plate A all the way to the paper feed opening (right side), and pull up.
• When setting 8-1/2" x 14" size paper in tray 2, check if the holder in the cassette is positioned at A4 (8-1/2" x 14" in
tray 2).
• When setting 8-1/2" x 11" size paper in tray 2, remove the 2 regulation plates with green color on the front and back
side of the tray before setting the paper. The plates are contained in the inside storage space of the back side of the
tray.
Regulation plate
3
B
A4
A6
Holder
Storage space
1-22
Adjust guide plates A and B to match
the longitudinal and transversal
dimensions of the paper to be loaded.
The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
Adjust to the non-standard paper size so that the paper will
not be too loose or too tight.
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.