Sharp MX-B350W User Manual page 143

FACSIMILE►BASIC TRANSMISSION METHODS
If the receiving party is busy
If the receiving party is busy, the transmission is temporarily canceled and then automatically re-attempted after a brief
interval. (Two attempts are made at an interval of 3 minutes.*
If you do not want the machine to re-attempt the transmission, press the [FAX STATUS] key and cancel the job.
4-21)
*1 The settings can be changed in the system settings. (See
If an error occurs that prevents transmission
If an error occurs that prevents transmission or the receiving machine does not answer the call within 45 seconds*
transmission is stopped and then automatically re-attempted later. One attempt is made at an interval of
2
1 minute.* ) If you do not want the machine to re-attempt the transmission, press the [FAX STATUS] key and cancel the
job. (►page 4-21) This machine also supports error correction mode (ECM) and is set to automatically resend any part
of a fax that is distorted due to noise on the line.*
*2 The settings can be changed in the system settings. (See
(page 7-20).)
*3 If the other fax machine does not support ECM or ECM is not operating, error correction will not take place.
1
)
Recall Setting (Busy) (page 7-20)
3
Ring Timeout In Auto TX (page 7-20)
4-18
(►page
)
2
, the
and Recall Set (Err)