FACSIMILE►OTHER FUNCTIONS
REPORT AT REGULAR INTERVALS
(COMMUNICATION ACTIVITY REPORT)
Your machine keeps a record of the most recent 50 transactions (both transmissions and receptions) that were
performed. The record includes the date of the transaction, the other party's name, the duration, and result.
You can have the report automatically printed when the number of transactions exceeds 50, or at a specified time. This
allows you to check the machine's activity at regular intervals.
The machine is initially set (factory default setting) to not print the report. To have the report printed, change the setting
in the system settings.
List Setting (page 7-18)
►
• Refer to the table on
TYPE/NOTE column.
• The activity report can also be printed out on demand.
► PRINTING LISTS OF PROGRAMMED INFORMATION AND SETTINGS (page 4-45)
WHEN AN ALARM SOUNDS AND A
WARNING MESSAGE IS DISPLAYED
When an error occurs during a transaction, an alarm will sound and a message will appear in the display.
If one of the following messages appears, follow the instructions in the table.
If another messages appears, see
Message
(alarm sounds)
XXXXXX
Line error.
SELF-DIAGNOSTIC FUNCTION
The machine has a self-diagnostic function that automatically stops operation if a problem occurs in the machine. If a
problem occurs in fax mode, the following display appears.
Message display
Call for service.
code:xx xx.
Main code
Sub code
WHEN A TRANSACTION REPORT IS PRINTED (page 4-58)
INDICATORS AND DISPLAY MESSAGES (page
Meaning of message
An error prevented completion of the
transaction.
Turn off the power and then turn it back on. If the error is not cleared, note the 2-digit main code
and the 2-digit sub-code and then contact your dealer.
Action
4-60
for the notes that appear in the
6-12).
Solution
Try the transaction again.
Page
–