FACSIMILE►BASIC TRANSMISSION METHODS
Canceling a stored transmission job
If you do not wish to cancel a stored transmission job and only wish to check its status, press the [BACK] key instead of
the [C] key in step 4 to exit.
Press the [FAX STATUS] key.
1
The fax job status screen is displayed.
When a transmission is in progress, the job being transmitted is displayed. Press the [BACK] key to display the fax
status selection screen.
Select "TX/RX Reserve" with the [ ] or [ ] key.
2
Press the [OK] key.
3
The first stored transmission job appears.
Press the [
] or [
Press the [C] key.
4
The transmission cancel confirmation screen appears.
Select "Yes" with the [ ] or [ ] key.
5
Press the [OK] key.
6
The selected transmission job is canceled.
If you wish to cancel another transmission job, repeat steps 1 through 6.
] key until the transmission job that you wish to cancel appears.
4-23