Configuring The Reception Method Of A Channel (Channel Type); Configuring The Transmission Mode (Transmit Mode) - Kenwood TKR-D710 Function Reference

4 TRANSMISSION/ RECEPTION/ REPEAT

4.5 Configuring the Reception Method of a Channel (Channel Type)

4.5 Configuring the Reception Method of a Channel (Channel Type)
Channel Type is the reception type for each channel. The repeater can be configured to wait to receive either an
analog signal or a DMR digital signal, or both types of signals.
Configuration
Analog
DMR
Mixed
Configuration using KPG-174D
Configuring Channel Type (

Configuring the Transmission Mode (Transmit Mode)

Transmit Mode is the mode for transmission by using the PTT (microphone) switch on a channel with "Mixed"
configured in Channel Type.
If the repeater is transmitting by using the PTT (microphone) switch, the repeater transmits in the mode configured in
Transmit Mode. However, the transmit mode varies depending on the receiving condition if Signaling Reset Timer
is configured. (Refer to Configuring the Duration of Transmission in the Received Mode (Signaling Reset
Configuration
Analog
DMR
Also, if the repeater is transmitting the received signal by using the Repeat PTT control, the repeater transmits an
analog signal if the repeater receives an analog signal, and the repeater transmits a DMR digital signal if the
repeater receives a DMR digital signal.
Configuration using KPG-174D
Configuring Transmit Mode (
FUNC (E)/Ver 2.50
Table 4-6 Channel Type
The repeater receives an analog signal.
The repeater receives a DMR digital signal.
The repeater receives both analog and DMR digital signals.
Edit > Channel Information > Channel Edit)
See
Table 4-7 Transmit Mode
The repeater transmits an analog signal when the repeater transmits by using
the PTT (microphone) switch.
The repeater transmits a DMR digital signal when the repeater transmits by
using the PTT (microphone) switch.
Edit > Channel Information > Channel Edit)
See
Description
Description
CONTENTS
Timer).)
INDEX 15