Bowflex BXT116 Service Manual page 83

6. Gently release the front snaps (indicated by ovals) that secure the
Motor Cover and pivot it back toward the walking belt until it releases.
Remove from the machine.
7. Using a #2 Phillips screwdriver, remove the 2 indicated screws from
the Motor Control Board Cover. Lift and remove the Motor Control Board
Cover.
Motor Control Board Cover
8. Remove the connectors for the Incline Motor Potentiometer and the
Incline Motor Cables
Incline Motor from the Motor Control Board after noting their locations
Incline Motor Potentiometer Cables
Note: Be sure to note where all cables attach for re-assembly.
Motor Control Board (MCB)
83