Bowflex BXT116 Service Manual page 85

9. Using a 16mm and a 17mm wrench in the Motor Compartment, remove
the hardware from the Incline Motor Assembly. Remove the Incline Motor
Assembly noting how it extends from the Motor Compartment through to the
Base Frame Weldment.
10. Make sure there is sufficient space to tilt the machine onto the left side.
Keep a minimum clearance behind the machine of 79" (2 m) and
24" (0.6 m) on each side. This is the recommended safe distance
for access, movement and emergency dismounts from the
machine.
Note: THE FOLLOWING STEP MAY REQUIRE A SECOND PERSON.
11. Tilt the machine onto the left side.
Be sure the area is clear around the machine before tilting it. Do
not grasp the Walking Belt since it can abruptly move.
The machine may be moved by one or more persons depending
on their physical abilities and capacities. Make sure that you and
others are all physically fit and able to move the machine safely.
12. Using two 17mm wrenches, remove the indicated hardware (with arrow)
from the Incline Motor Assembly.
Incline Motor Assembly
Base Frame Weldment
85
Incline Motor Assembly